Martin Jem Glaciator X-Stream | Smoke Machines | Hire

Mechanical Specification

Height: 769mm (30.29")

Length: 785mm (30.91")

Width: 648mm (25.52")

Weight, dry: 124kg (274 lbs)

Weight, filled: 129kg (285 lbs)

PERFORMANCE

Coverage volume: 80 m3 (2825 ft3) minute

Fluid consumption, continuous maximum output: 70 ml minute

Ready time (minimum): 5-minutes

Ready time (optimal): 7-minutes

Continuous effect output

CONTROL AND PROGRAMMING

Control options: Integrated digital remote control, fast access keypad, DMX/RDM, master/client

Control parameters: Continuous or timer-controlled output

Low-Fog/Fan: Proportionally controlled output, 0-100%

DMX channels: 1/2

Setting and addressing: Control panel with backlit LCD display and 6-button user interface or via RDM

DMX compliance: ANSI E1.11 - USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20 RDM

CONSTRUCTION

Housing: SteelColor: Black

Portability: Removable castors

Protection rating: IP20

Heat exchanger: 2500 W, thermally protected

Fluid pump, low-fog fluid: Oscillating piston, high-pressure

Fluid pump, waste condensate: Peristaltic pump, low-pressure

Fluid management, low-fog fluid: Fluid out sensing, sealed for transportation

Fluid management, waste condensate: Visual sight gauge, LED illuminated reservoir

Fluid reservoir, low-fog fluid: 5 l drop-in reservoir w/ quick connect fitting or external source

Fluid reservoir, waste condensate: 0.5 l drop in reservoir w/ quick connect fitting or external source

Refrigeration: Closed loop system, variable speed condenser fans, electronic expansion valve

Refrigeration control: PWM electronic control

Remote Control: Integrated digital remote with 5 m (16.4 ft.) cable, 3-pin XLR

Remote Control Cable Length (max.): 25 m (82 ft.)

Optional Ducting Kit: Black, steel, triple ducting adaptor with 3x 5 m (16.4 ft.) 150 mm (6 in.) OD flexible ducting hoses and includes 3x stainless steel duct clamps, worm drive, hex screw

Optional Fog Blade: Black, steel, 150 mm (6 in.) outlet, includes 1x stainless steel duct clamp, worm drive, hex screwOptional External Fluid Kit: 25 l sealed fluid reservoir, 1.5 m (4.9 ft.) 8 mm OD, 6 mm ID, silicone tubing, pipetta fitting

Optional Softcover: Black, heavy duty PVC external, brushed nylon padding interior, hook and loop fastener system, 5 in. x 8 in. transparent PAL transit pocket

INSTALLATION

Location: Dry location only

Orientation: Horizontal Only

Clearance around machine: 60 cm (24 in.)

Ducting: Optional, max length 10 m (32.8 ft.)

CONNECTIONS

AC Power: Hardwired flexible mains cable, 3 x 4.0 mm2 (6 AWG), 3.3 m (10.8 ft.)

DMX/RDM in/out: 3- and 5-pin locking XLR

Remote control: 3-pin locking XLR

Firmware: AVR socket

Fluid inlet, low-fog fluid: Brass barbed hose tail, 6 mm

Fluid outlet, waste: Brass barbed hose tail, 6 mm

ELECTRICAL

AC power: 208 - 250 V single phase, 50/60 Hz

Typical power consumption, standby: 10 W

Typical power consumption, maximum: 3500 W

Integrated resettable circuit breaker: 25 A, 240 V max., 50/60 Hz

Power supply unit: Auto-ranging electronic switch-mode

Half-cycle RMS inrush current at 230 V, 50 Hz: 20 A

TYPICAL POWER AND CURRENT

208 V, 60 Hz: 3350 W, 17.8 A, PF 0.96*

220 V, 50 Hz: 3350 W, 16.9 A, PF 0.96*

230 V, 50 Hz: 3350 W, 15.6 A, PF 0.96*

240 V, 50 Hz: 3350 W, 15.2 A, PF 0.96*

*Figures are typical, not maximum. Measurements made at nominal voltage, allow for a deviation of +/- 10%. PF = Power Factor.

THERMAL

Cooling: Forced air, low noise

Maximum ambient temperature (Ta max.): 35° C (95° F)

Minimum ambient temperature (Ta min.): 5° C (41° F)

Exterior surface temperature, steady state: 30° C (86° F)

Total heat dissipation, idle (calculated, +/- 10%): 2241 BTU/hr.

Total heat dissipation, full load (calculated, +/- 10%): 11430 BTU/hr.

ACOUSTIC

Noise level average, maximum low-fog output: 62.76 dBa

Noise level average, standby: 40.47

Martin Jem Glaciator Dynamic

Smaller, quieter, and capable of taking low-fog to more locations—the live event industry’s leading low-fog machine returns with its most significant upgrade in over a decade. Martin JEM Glaciator Dynamic is your complete solution for creating dense, billowy clouds of low-lying fog in any venue without the use of industrial gases or ice. Achieve lush fog on stage with longer-lasting effects. Reduce noise with near-silent operation, perfect for theatrical applications. Enjoy more room backstage with an all-new, more compact design. And tour the world with an updated universal power supply. With a full range of premium accessories, three low-fog fluid types to choose from, and streamlined user controls, you can create dramatic atmospheric effects for your production in moments. Just plug in, set the stage and amaze.

World touring capabilities via a universal power supply that operates at 208-250 V, 50/60 Hz
Onboard industry standard DMX connectivity (both 3- and 5- pin) for control and integration
Intuitive user interface with Fast Access Keypad for fast, easy manipulation of low-fog output
180° Low-fog outlet engineered for a smooth, consistent low-fog field
Achieve diverse effects with three premium fluid options
Simple, one-touch fluid priming
5 l internal fluid reservoir provides an hour of continual consistent low-fog output
All-in-one, self-contained solution without the need for external fans, industrial gas tanks, or ice
All-new Electronic Inverter Drive for improved effects and lower ambient noise
Fill your stage with low-fog thanks to continuous 80 m³ (2825 ft³) per-minute output
Even smaller, compact service-friendly design: 785 x 648 x 769 mm (30.9 x 25.5 x 30.2 in.)